Most modern machines don’t have a serial port as standard; you could use a USB to serial lead, however, if you have another machine available that does have a serial port you can access it remotely over TCP/IP.
ser2net to Connect a Serial Port to a TCP port
ser2net listens to a TCP port and pipes data to and from a serial port via the TCP port. It is configured by the file
/etc/ser2net.conf and is run on the machine with the serial port that you want to make available over TCP/IP. An example configuration file would look like this:
This would tell
ser2net to create a link between TCP port
/dev/ttyS0. The serial port would be configured to 115200 baud, 8 data bits, no parity and 1 stop bit.
Once you have created the configuration file you can either start
ser2net by running:
or if you have started it as a service you may need do something like:
# /etc/init.d/ser2net restart
or if using
# systemctl restart ser2net
From this point I’ll refer to the machine with the serial port as
SerialMachine. If you connect to port
SerialMachine, whatever you send or receive to/from that port will actually be to/from the serial port on
Accessing a Remote Serial Port from DOSBox
A common use for this would to be to access a serial port form an emulator. To access a remote serial port, that has been set up as above, from DOSBox you would need the following line in your
serial1=nullmodem server:SerialMachine port:3333
Now, whenever you use
COM1 from within DOSBox, you’ll actually be using the serial port on
socat to Connect a Pseudo TTY to a Remote Serial Port
If the application you want to use doesn’t know how to talk to serial ports over TCP/IP you can use socat. This is an incredibly flexible utility and can even replicate much of the functionality of
ser2net, however it is a little more difficult to use, hence the reason that I have combined the two utiltiies. To create a psuedo tty device called
~/dev/ttyV0 and connect it to the remote serial port on
SerialMachine run :
$ socat pty,link=$HOME/dev/ttyV0,waitslave tcp:SerialMachine:3333
This will then allow you to specify
~/dev/ttyV0 as the device name in an application such as minicom.
ser2net and socat are available on most Linux distributions, but if yours doesn’t provide a package then they are fairly easy to download and install from their home pages. If you are not sure what to do with the new serial ports that you now have access to, why not hook-up a modem and see what BBS’s are still around.